We stock & supply
1. ASTM A335 P22 Alloy Steel Pipe for Oil and Gas Pipeline
2. ASTM A335 P22 Alloy Steel Pipe for Chemical Industry
3. ASTM A335 P22 Alloy Steel Pipe Pipe Bend for Plumbing
4. ASTM A335 P22 Alloy Steel Pipe for Heating
5. ASTM A335 P22 Alloy Steel Pipe for Water Supply Systems
ASTM A335 P9 Alloy Steel Pipe
Size | : | 1/8NB TO 24NB IN |
Standards | : | ASTM A 335, ASME SA 335, ANSI B36.10 |
Type | : | Seamless |
Specialized in | : | Large Diameter Size |
Wall Thickness | : | Schedule 20 - Schedule XXS (heavier on request) up to 250 mm thk. |
Form | : | Round, Square, Rectangular, Hydraulic Etc. |
Length | : | Single Random, Double Random & Cut Length. |
Tubing End | : | Plain End, Beveled End, Treaded. |
C, % | Mn, % | P, % | S, % | Si, % | Cr, % | Mo, % |
0.015 max | 0.30-0.61 | 0.025 max | 0.025 max | 0.50 max | 1.90-2.60 | 0.87-1.13 |
Tensile Strength, MPa | Yield Strength, MPa | Elongation, % |
415 min | 205 min | 30 min |
|
P5, P9, P11, and P22 |
|
|
Grade |
Heat Treatment Type |
Normalizing Temperature Range F [C] |
Subcritical Annealing |
P5 (b,c) |
Full or Isothermal Anneal |
|
|
|
Normalize and Temper |
***** |
1250 [675] |
|
Subcritical Anneal (P5c only) |
***** |
1325 - 1375 [715 - 745] |
P9 |
Full or Isothermal Anneal |
|
|
|
Normalize and Temper |
***** |
1250 [675] |
P11 |
Full or Isothermal Anneal |
|
|
|
Normalize and Temper |
***** |
1200 [650] |
P22 |
Full or Isothermal Anneal |
|
|
|
Normalize and Temper |
***** |
1250 [675] |
P91 |
Normalize and Temper |
1900-1975 [1040 - 1080] |
1350-1470 [730 - 800] |
|
Quench and Temper |
1900-1975 [1040 - 1080] |
1350-1470 [730 - 800] |
|
Seamless |
|
||||
P-5 |
P-9 |
P-11 |
P-22 |
P-91 |
P91 shall not have a hardness not exceeding 250 HB/265 HV [25HRC]. |
|
Tensile Strength, min., psi |
||||||
ksi |
60 |
60 |
60 |
60 |
85 |
|
MPa |
415 |
415 |
415 |
415 |
585 |
|
Yield Strength, min., psi |
|
|||||
ksi |
30 |
30 |
30 |
30 |
60 |
|
MPa |
205 |
205 |
205 |
205 |
415 |
|
NPS [DN] Designator | Tolerance, % from Specified | |
Over | Under | |
1/8 to 2 1/2 [6 to 65] incl., all t/D ratios | 20.0% | 12.5% |
Above 2 1/2 [65], t/D < or = 5% | 22.5% | 12.5% |
Above 2 1/2 [65], t/D > 5% | 15.0% | 12.5% |
(t = Specified Wall Thickness; D = Specified Outside Diameter) |