ASTM A234 WP5 Reducing Tee suppliers
A tee is a branched, reinforced outlet fitting that permits flow at 90 to the main flow. The main flow passes through the run of the tee.
The 90 outlet is called the branch of the tee. ASTM A234 WP5 straingt tee is manufactured with all three outlets, the run as well as the branchm the same size. ASTM A234 WP5 reducing tee is made with the branch outlet smaller than the run to accoomodate the design flow rate.
1. ASTM A234 WP5 Stright Tee
2. ASTM A234 WP5 Reducing Tee
| Grade Specifications | Chrome Moly Grades P1, P5, P9, P11, P22, P91 |
| Specification | ASTM/ ASME A/SA234 WP1, WP5, WP9, WP11, WP22, WP91 |
| Type | Seamless / Welded / Fabricated / Forged |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
| Range | ½" NB to 48″ NB in Sch 10s, 40s, 80s, 160s, XXS. |
| Dimensions | ANSI/ASME B16.9, B16.28, MSS-SP-43. |
| Applicable Standards | 1-ASME B 16.9 for large Bore 2-ASME B 16.11 for small Bore (socket welded) 3-ASME B 16.25 for butt weld ends 4-ASME B 16.28 for small radius elbow |
| End Prep: |
| Grade | C | Mn | Si | S | P | Cr | Mo |
|---|---|---|---|---|---|---|---|
| A234 WP5 | ≤0.15 | ≤0.6 | ≤0.5 | ≤0.04 | ≤0.03 | 4-6 | 0.44-0.65 |
| Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation % |
|---|---|---|---|
| A234 WP5 | 415 – 585 | ≥205 | ≥20 |
Export Destination of Alloy Steel Pipe Fitting ASTM A234 WP5 Reducing Tee
HUITONG LIMITED CHINA have exported Alloy Steel Pipe Fittings ASTM A234 WP5 Reducing Teeto over 60 countries including Sudan,UAE, UK, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazi, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angloa & Srilanka.
For any enquiries related to Alloy Steel Pipe Fittings ASTM A234 WP5 Reducing Tee, kindly contact us on :-
+86-65268001 info@alloysteelfitting.com
